FIBARO Temperature/Humidity Sensor
You have to log in to shop/see prices.
|
|
FIBARO Temperature/Humidity Sensor
|
Description
Specifications
Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact. The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.
| Formål | Indendørs/udendørs |
| Type | Fritstående |
| Forbindelsesteknologi | Trådløs |
| Fugtighed måleinterval | 0 - 40% |
| Nøjagtighed | 0,5 °C |
| Arbejdsområde | 50 m |
| Batteritype | CR123A |
| Antal understøttede batterier | 1 |
| Bredde | 72 mm |
| Dybde | 72 mm |
| Højde | 28 mm |
| Indbygget display | No |
Please note that although care has been taken in the degree of relevancy, pictures are for
display purposes only, and product appearance may differ from what you see. If there are any
discrepancies between the product headline, description and picture, the correct information
will be in the product headline (i.e. computer systems may not come with monitors even if
pictured that way). If anything is unclear, please email support before placing your order.