DELOCK Storage drive docking station
You have to log in to shop/see prices.
|
|
DELOCK Storage drive docking station
-
Disk Interface
SATA
-
Installed
0GB
-
Max Disks
2
-
RAID
No
-
Type
Docking
|
Docking Station for 1 x M.2 NVMe SSD + 1 x M.2 SATA SSD with SD Express (SD 7.1) Card Reader and Clone Function
64138
Features:
- SD Express slot. The SD Express slot allows to read and write SD Express memory cards. SD, SDHC and SDXC memory cards with UHS-I and UHS-II can also be used.
- Simultaneous using of all ports. All three memories can be used simultaneously.
- Clone Function without PC. The built-in clone function allows to clone memory without using a PC. It is possible to clone from NVMe to SATA, SD to NVMe, SD to SATA and SATA to NVMe.
- Ideal test equipment. The memory is simply plugged into the robust housing and can be used immediately. No screws, tools or accessories are required, which means that the SSD can be changed quickly.
- Power supply included. The power supply, which is included, will be connected to the USB-C™ power connector and thus supplies the docking station and all connected memories with power.
Specifications:
General
- Connectors:
- 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
- 2 x 67 pin M.2 key M slot
- 1 x SD Express slot
- 1 x USB Type-C™ female (power supply)
- Chipset: JMicron JMS581
- Supports M.2 modules with key M or key B+M based on PCIe (NVMe)
- Supports M.2 modules with key B+M based on SATA
- Supports NVM Express (NVMe)
- Supports S.M.A.R.T.
- Supports TRIM
- Supports DevSleep
- Supports Native Command Queuing (NCQ)
- Data transfer rate up to 10 Gbps
- Supports SD 3.0 (UHS-I), SD 4.0 (UHS-II), SD 5.1 (UHS-II V90), SD 7.1
- Supports UASP
- LED indicator for power, access and copy status
- Bootable
- Function key:
- 1 x Clone button
- 1 x On / Off switch
- 1 x DIP switch for clone mode
- Dimensions (LxWxH): ca. 76 x 79 x 18 mm
- Hot Plug, Plug & Play
Power supply specification
- Wall power supply
- Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.6 A
- Output: 5.0 V / 3.0 A
System requirements
- Android 10.0 or above
- Chrome OS 90.0 or above
- iPad Air (4th Generation) or above
- Linux Kernel 5.8 or above
- Mac OS 11.2.3 or above
- Surface Pro 7
- Windows 8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port or
- Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 port
Package content
- M.2 docking station
- Cable USB-C™ male to USB-C™ male, length ca. 80 cm
- Cable USB-C™ male to USB Type-A male, length ca. 80 cm
- External power supply
- User manual
Please note that although care has been taken in the degree of relevancy, pictures are for
display purposes only, and product appearance may differ from what you see. If there are any
discrepancies between the product headline, description and picture, the correct information
will be in the product headline (i.e. computer systems may not come with monitors even if
pictured that way). If anything is unclear, please email support before placing your order.