DELOCK 42592 3.5? Mobile Rack for 1 x 2.5? SATA / SAS HDD / SSD

This solid metal mobile rack by Delock can be installed into a free 3.5″ bay of a PC and ensures a 360° vibration protection against horizontal and vertical vibrations through the built-in rubber bumpers. A 2.5″ SATA or SAS hard drive can be screwed into the frame. For operation with a SAS drive, a SAS controller is required. The mobile rack is equipped with a key lock to prevent unauthorised access. The hot swap function allows the exchange of the hard disk drive during operation. Furthermore the SATA plug on the outside of the device has a locking port, which will ensure the SATA cables click into place, and are protected against vibrations. The mobile rack can be used wherever the PC is subject to vibrations.

- For installation into an available 3.5″ bay
- Connectors:
- inside:
- 1 x SATA 6 Gb/s / SAS 12 Gb/s 22 pin receptacle
- outside:
- 1 x SATA 6 Gb/s 22 pin plug with locking port
- Suitable for 2.5″ SATA / SAS HDD / SSD:
- HDD height up to 15 mm
- supports 5 V HDD / SSD
- Data transfer rate:
- SATA up to 6 Gb/s
- SAS up to 12 Gb/s
- With key lock
- Hot Swap
- OS independent, no driver installation necessary